Skip to content
FREE SHIPPING ON ORDERS OVER $100. EXCLUSIONS APPLY.
FREE SHIPPING ON ORDERS OVER $100. EXCLUSIONS APPLY.

iSweep Chassis Brace Kit

67,300.00؋
SKU IS.CCWK.F56

Notify me when back in stock

Verify fitment with your vehicle

(Change vehicle)

COMPATIBLE VEHICLES

  • MINI Convertible F57 1.5T
  • MINI Convertible F57 JCW 2.0T
  • MINI Convertible F57 LCI 1.5T
  • MINI Convertible F57 LCI JCW 2.0T
  • MINI Convertible F57 LCI S 2.0T
  • MINI Convertible F57 LCI2 1.5T
  • MINI Convertible F57 LCI2 JCW 2.0T
  • MINI Convertible F57 LCI2 S 2.0T
  • MINI Convertible F57 S 2.0T
  • MINI Hardtop 4-Door F55 1.5T
  • MINI Hardtop 4-Door F55 JCW 2.0T
  • MINI Hardtop 4-Door F55 LCI 1.5T
  • MINI Hardtop 4-Door F55 LCI JCW 2.0T
  • MINI Hardtop 4-Door F55 LCI S 2.0T
  • MINI Hardtop 4-Door F55 LCI2 1.5T
  • MINI Hardtop 4-Door F55 LCI2 JCW 2.0T
  • MINI Hardtop 4-Door F55 LCI2 S 2.0T
  • MINI Hardtop 4-Door F55 S 2.0T
  • MINI Hardtop F56 1.5T
  • MINI Hardtop F56 JCW 2.0T
  • MINI Hardtop F56 LCI 1.5T
  • MINI Hardtop F56 LCI JCW 2.0T
  • MINI Hardtop F56 LCI S 2.0T
  • MINI Hardtop F56 LCI2 1.5T
  • MINI Hardtop F56 LCI2 GP 2.0T
  • MINI Hardtop F56 LCI2 JCW 2.0T
  • MINI Hardtop F56 LCI2 S 2.0T
  • MINI Hardtop F56 S 2.0T

 

Front Lower Subframe Brace
For the F55 and F56, we designed the brace to be as wide as possible. This design holds the complete front end in place and resists any unwanted twist, vertical or lateral. It is designed to significantly improve stability and cornering performance. Once installed the brace will effectively distribute the stress caused when driving evenly into the front cross member and chassis. This has been proven to improve suspension travel by suppressing unwanted movement and is able to keep the wheel alignment true. Our front subframe brace is a strict bolt-on unit. No modification is required to attach this brace. The mounting points were carefully thought out through our R&D and are securely bolted into six places 

Floor Tunnel Center Brace
Our iSweep Center Floor Power Brace replaces the factory piece. Our Power Brace is designed for strength and also to be lightweight, it is made in high strength steel and formed into a box structure for super strength. By improving the floor rigidity to the body it suppresses the unpleasant twist and movement of the body. 

Rear Lower Subframe Brace
The iSweep Rear Lower Subframe brace is a simple bolt-on product. It is designed to be very high in strength and also lightweight. We used high tensile steel and formed the brace in a box structure. This design is able to take far more stress compared to the stock unit. The brace will securely hold the rear lower control arms in place during spirited driving and hard cornering thus keeping the vehicle behavior neutral. 

Notes:

Not recommended when paired with a factory exhaust system (North American models) due to tight clearance to secondary catalytic converter. 

Made in JAPAN

Installation Instructions