Skip to content
FREE SHIPPING ON ORDERS OVER $100. EXCLUSIONS APPLY.
FREE SHIPPING ON ORDERS OVER $100. EXCLUSIONS APPLY.

NM Eng. Anti-Sway Bar - Rear 22mm Sport

26,600.00؋
SKU NM.258846

Notify me when back in stock

Verify fitment with your vehicle

(Change vehicle)

COMPATIBLE VEHICLES

  • MINI Convertible F57 1.5T
  • MINI Convertible F57 JCW 2.0T
  • MINI Convertible F57 LCI 1.5T
  • MINI Convertible F57 LCI JCW 2.0T
  • MINI Convertible F57 LCI S 2.0T
  • MINI Convertible F57 LCI2 1.5T
  • MINI Convertible F57 LCI2 JCW 2.0T
  • MINI Convertible F57 LCI2 S 2.0T
  • MINI Convertible F57 S 2.0T
  • MINI Hardtop 4-Door F55 1.5T
  • MINI Hardtop 4-Door F55 JCW 2.0T
  • MINI Hardtop 4-Door F55 LCI 1.5T
  • MINI Hardtop 4-Door F55 LCI JCW 2.0T
  • MINI Hardtop 4-Door F55 LCI S 2.0T
  • MINI Hardtop 4-Door F55 LCI2 1.5T
  • MINI Hardtop 4-Door F55 LCI2 JCW 2.0T
  • MINI Hardtop 4-Door F55 LCI2 S 2.0T
  • MINI Hardtop 4-Door F55 S 2.0T
  • MINI Hardtop F56 1.5T
  • MINI Hardtop F56 JCW 2.0T
  • MINI Hardtop F56 LCI 1.5T
  • MINI Hardtop F56 LCI JCW 2.0T
  • MINI Hardtop F56 LCI S 2.0T
  • MINI Hardtop F56 LCI2 1.5T
  • MINI Hardtop F56 LCI2 GP 2.0T
  • MINI Hardtop F56 LCI2 JCW 2.0T
  • MINI Hardtop F56 LCI2 S 2.0T
  • MINI Hardtop F56 S 2.0T

 

Those who are familiar with the older gen MINIs know how much of an improvement they get from NM Engineering's Rear Anti Sway Bar. It is essentially the best body roll management you can ever do to your MINI. The handling characteristic and steering input are so well enhanced it is almost as good, if not better, compared to installing lowering springs or coil-overs.

Front-wheel drive cars naturally understeer from the factory, even the MINIs. The NM Engineering Solid 22mm Rear Anti Sway Bar improves your F-chassis MINI by inducing more oversteer and increasing the car handling predictability.

F56 SWAY BAR COMPARISON
Rate 1 Rate 2
lbs./in. Increase over 'Base' lbs./in. Increase from 'Base'
OEM Base 19MM Solid 182 - - -
OEM Sport / JCW 21mm Tubular 253 39% - -
NM Eng. 22mm Solid 298 63% 375 106%
NM Eng. 25mm Tubular 510 180% 642 252%

Notes:

NM Eng Anti Sway Bar features:

  • mandrel-bent solid Chromoly bar providing consistent diameter throughout for precise torsion motion
  • forged ends (not cheapy welded plate) with two adjustment mounting holes
  • graphite impregnated urethane bushing
  • glossy blue powder coat finish

Optional Billet clamp kit features:

  • billet 7075-T6 aerospace grade sway bar bracket
  • 90° Zerk fitting for ease of re-greasing
  • graphite impregnated urethane bushing
Installation Instructions