NM Eng. Anti-Sway Bar End Links - Front
DOES THIS FIT YOUR VEHICLE?
Click here to see if your vehicle is compatible
This part fits these vehicles:
- MINI R55 Clubman JCW 1.6T N14
- MINI R55 Clubman JCW 1.6T N18
- MINI R55 Clubman Non-S 1.6L
- MINI R55 Clubman S 1.6T N14
- MINI R55 Clubman S 1.6T N18
- MINI R56 Hardtop GP 1.6T N18
- MINI R56 Hardtop JCW 1.6T N14
- MINI R56 Hardtop JCW 1.6T N18
- MINI R56 Hardtop Non-S 1.6L
- MINI R56 Hardtop S 1.6T N14
- MINI R56 Hardtop S 1.6T N18
- MINI R57 Convertible JCW 1.6T N14
- MINI R57 Convertible JCW 1.6T N18
- MINI R57 Convertible Non-S 1.6L
- MINI R57 Convertible S 1.6T N14
- MINI R57 Convertible S 1.6T N18
- MINI R58 Coupe JCW 1.6T N14
- MINI R58 Coupe JCW 1.6T N18
- MINI R58 Coupe Non-S 1.6L
- MINI R58 Coupe S 1.6T N18
- MINI R59 Roadster JCW 1.6T N14
- MINI R59 Roadster JCW 1.6T N18
- MINI R59 Roadster Non-S 1.6L
- MINI R59 Roadster S 1.6T N18
NM Engineering’s new Front Adjustable Sway Bar Links provides three benefits:
- Direct transmission of suspension movements to the sway bar
- On lowered vehicles, allows repositioning of the anti-sway bar to a neutral position
- Can eliminate sway bar pre-loading to compensate for poorly manufactured sway bars
Everything starts with the material – after all, it is the foundation of the part. NM Engineering did not skimp here as these links are precision CNC machined from 7075-T6 aluminum here in California. Because this is a high-stress part, 7075 was chosen because it has the same tensile strength as steel, yet is much lighter. Just to compare, 7075-T6 has almost twice the tensile strength compared to 6061-T6.
Another benefit afforded by 7075-T6 is it allowed NM Engineering to machine or turn-down the centers of the links to save weight and stay clear of the brake lines and brake pad sensor wires. To give you an idea of how thin the link is, the centers of the NM links are thinner than a standard AA battery.
NM’s links also utilize precision CNC machined stainless steel ball-joint spacers as stainless steel is stronger and more durable than 6061 aluminum alloy. To maximize adjustability, NM chose a special thin jam nut which allows an additional ¼" of adjustment compared to others being sold in the market.
The length of the front and rear links are compensated for lowered vehicles so the sway bar arms will sit in a neutral position relative to the swingarm. The length of the rear links is 25mm shorter and the fronts are 12mm longer compared to OE links. This is also 'the' solution for enthusiasts out there with coil-over suspension that lower the ride height more than 1.5".
By the way, a quick note on the materials we use…whether it is 6061-T6 or 7075-T6, all grade materials we purchase are certified. We will NEVER buy uncertified scrap or overrun materials from metal/alloy vendors.
Material Strength Data:
NM Engineering’s Front Adjustable Sway Bar Links will not yield like their OE counterparts making sure that all suspension movements are transmitted to the sway bar for maximum performance. This part is a must especially on lowered vehicles or cars equipped with aftermarket sway bars.
Finish: Type III Hard Anodize